![Plastic Snap-Together SES 10mm Lampholder [Threaded Skirt]](/web/image/product.product/17665/image_1024/%5B06273%5D%20Plastic%20Snap-Together%20SES%2010mm%20Lampholder%20%5BThreaded%20Skirt%5D%20%28Black%29?unique=4cf1d4f)
![Plastic Snap-Together SES 10mm Lampholder [Threaded Skirt]](/web/image/product.image/514/image_1024/Plastic%20Snap-Together%20SES%2010mm%20Lampholder%20%5BThreaded%20Skirt%5D?unique=4cf1d4f)
![Plastic Snap-Together SES 10mm Lampholder [Threaded Skirt]](/web/image/product.product/17665/image_128/%5B06273%5D%20Plastic%20Snap-Together%20SES%2010mm%20Lampholder%20%5BThreaded%20Skirt%5D%20%28Black%29?unique=4cf1d4f)
![Plastic Snap-Together SES 10mm Lampholder [Threaded Skirt]](/web/image/product.image/514/image_128/Plastic%20Snap-Together%20SES%2010mm%20Lampholder%20%5BThreaded%20Skirt%5D?unique=4cf1d4f)
Applications / Guidance
Often used in mass produced lighting, this part is available as a replacement to an existing broken lampholder of the same specification. The terminals are 'push in' which means that once the wire has been pushed in it is not recommended and hard to release. However if the existing lampholder base is fixed in place, this is a good option because the top part should be compatible with the existing base, if it is the same snap together specification. Fits a 30mm shade hole
Warnings / Disclaimers
If in doubt consult a qualified electrician
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.