[05846]
Porcelain Panel Mounting SES Lampholder
Exposed Terminals
Replacement Porcelain Lampholder
SES / E14
Internal Base Fixing
Not Shade Compatible
Width - 33mm, Height - 45mm
Industrial and designed to go in high heat environments. This lampholder has exposed terminals and no earth. It has 2 mounting holes in its base, fixing centres 19mm and 4mm in diameter. Very narrow head bolts or screws will need to be used. (Engineers tip - hang on to the ones from the fitting you are replacing)
Warnings / Disclaimers
Before starting any electrical work, always switch off at the mains. If in doubt consult a competent electrician
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.