[E27 Lampholder]

Porcelain Panel Mounting ES Lampholder

https://lampfix.odoo.com/web/image/product.template/19090/image_1920?unique=03f6c3f

Exposed Terminals
Replacement Porcelain Lampholder
ES / E27
Not Shade Compatible
Width - 42mm, Height - 50mm

£ 3.04 3.04 GBP £ 3.04 Excluding VAT

£ 3.04 Excluding VAT

Not Available For Sale

    This combination does not exist.

    05175 - The most common replacement. Fixes through the x2 holes in the base.

    05984 - Especially useful if connecting to lighting thread (M10x1.0mm Fine Pitch) as it has an earth terminal attached.

    05985 - Often used as a replacement in an appliance, high-end bulkhead, uplighter or light fitting particularlywhere heat is an issue.

    06322 - The bracket on this lampholder stands 14mm away from the base in both directions (right angled). Single hole (5mm diameter) for mounting.

    06070 - Length of the bracket on this lampholder is 62mm. Width of the bracket is 8mm. Diameter of the mounting slots is 4mm.

    06323 - To clip into mounting hole diameter of 55mm. Total width of bracket including 'wings' is 65mm.





    Warnings / Disclaimers

    If in doubt, consult a qualified electrician. Wiring terminals are exposed so must be covered or used in an enclosed fitting.